51213 bearing
65 × 100 mm · dynamic rating 60.5 kN · static rating 150 kN. Dimensions, load ratings, designation meaning, life estimates and equivalent parts.
51213 specification
| Designation | 51213 |
| Type | Single-direction thrust ball bearing |
| Series | 512 light-medium |
| Bore diameter d | 65 mm |
| Outside diameter D | 100 mm |
| Basic dynamic load rating C | 60.5 kN (60,500 N) |
| Basic static load rating C0 | 150 kN (150,000 N) |
| Ratio C0/C | 2.48 |
| Speed guide, grease lubrication | 3,600 rpm |
| Life exponent p | 3 (ball bearing) |
Values come from the Rotec AI bearing catalogue and are indicative. Confirm against the manufacturer's current catalogue before ordering. Not every dimension (such as width) is listed here.
What the designation 51213 means
| Code | Meaning |
|---|---|
| 512 | Single-direction thrust ball bearing, light-medium series (flat seat washers) |
| 13 | bore code "13" = 13 × 5 = 65 mm |
Basic rating life of the 51213
Basic rating life is L10 = (C / P)p million revolutions, where P is the equivalent dynamic load and p = 3 (ball bearing). For a 51213 with C = 60.5 kN, the table shows what that gives at different load levels. It is the ISO 281 basic life only: it does not include lubrication, contamination, misalignment or reliability modifiers.
| C / P | P as share of C | L10 (million rev) | L10 at 1,500 rpm | L10 at 3,000 rpm |
|---|---|---|---|---|
| 3 | 33.3% | 27 | 300 | 150 |
| 5 | 20.0% | 125 | 1,400 | 690 |
| 8 | 12.5% | 512 | 5,700 | 2,800 |
| 12 | 8.3% | 1,728 | 19,200 | 9,600 |
For example, a C / P of 5 means the equivalent load is 12.1 kN on this bearing. Use the Load Calculator to work out P for your actual radial and axial loads.
Equivalents of the 51213
Brand-by-brand equivalents for this exact designation are not shown here. The Cross-Reference tool accepts SKF, FAG, NSK, NTN, Timken, Koyo and NRB designations, and shows what is catalogued.
Where the 51213 is used
Thrust ball / thrust roller bearings are chosen for: Predominantly axial load. Typical equipment: Vertical pumps, extruders, turbines, marine and heavy gear drives. Thrust roller for higher axial capacity and shock.
Other sizes in the same series
The 51213 belongs to the “512 light-medium” series. The next size down, the 51212, has a bore of 60 mm and a dynamic rating of 59.2 kN. The next size up, the 51214, has a bore of 70 mm and a rating of 62.4 kN (+3%).
Common problems on bearings like the 51213
Most field failures trace back to lubrication, contamination, fits and alignment rather than the bearing itself. These guides explain how to recognise and prevent them:
Questions about the 51213
What are the dimensions of a 51213 bearing?
The 51213 has a bore of 65 mm and an outside diameter of 100 mm. It is a single-direction thrust ball bearing. Series: 512 light-medium.
What is the load rating of a 51213 bearing?
In the Rotec AI catalogue the 51213 has a basic dynamic load rating C of 60.5 kN and a basic static load rating C0 of 150 kN. Always confirm against the manufacturer's current catalogue.
What is the equivalent of a 51213 bearing?
Use the Cross-Reference tool in Rotec AI to check brand equivalents for the 51213.