51210 bearing
50 × 78 mm · dynamic rating 49.4 kN · static rating 116 kN. Dimensions, load ratings, designation meaning, life estimates and equivalent parts.
51210 specification
| Designation | 51210 |
| Type | Single-direction thrust ball bearing |
| Series | 512 light-medium |
| Bore diameter d | 50 mm |
| Outside diameter D | 78 mm |
| Basic dynamic load rating C | 49.4 kN (49,400 N) |
| Basic static load rating C0 | 116 kN (116,000 N) |
| Ratio C0/C | 2.35 |
| Speed guide, grease lubrication | 4,500 rpm |
| Life exponent p | 3 (ball bearing) |
Values come from the Rotec AI bearing catalogue and are indicative. Confirm against the manufacturer's current catalogue before ordering. Not every dimension (such as width) is listed here.
What the designation 51210 means
| Code | Meaning |
|---|---|
| 512 | Single-direction thrust ball bearing, light-medium series (flat seat washers) |
| 10 | bore code "10" = 10 × 5 = 50 mm |
Basic rating life of the 51210
Basic rating life is L10 = (C / P)p million revolutions, where P is the equivalent dynamic load and p = 3 (ball bearing). For a 51210 with C = 49.4 kN, the table shows what that gives at different load levels. It is the ISO 281 basic life only: it does not include lubrication, contamination, misalignment or reliability modifiers.
| C / P | P as share of C | L10 (million rev) | L10 at 1,500 rpm | L10 at 3,000 rpm |
|---|---|---|---|---|
| 3 | 33.3% | 27 | 300 | 150 |
| 5 | 20.0% | 125 | 1,400 | 690 |
| 8 | 12.5% | 512 | 5,700 | 2,800 |
| 12 | 8.3% | 1,728 | 19,200 | 9,600 |
For example, a C / P of 5 means the equivalent load is 9.88 kN on this bearing. Use the Load Calculator to work out P for your actual radial and axial loads.
Equivalents of the 51210
Brand-by-brand equivalents for this exact designation are not shown here. The Cross-Reference tool accepts SKF, FAG, NSK, NTN, Timken, Koyo and NRB designations, and shows what is catalogued.
Where the 51210 is used
Thrust ball / thrust roller bearings are chosen for: Predominantly axial load. Typical equipment: Vertical pumps, extruders, turbines, marine and heavy gear drives. Thrust roller for higher axial capacity and shock.
Other sizes in the same series
The 51210 belongs to the “512 light-medium” series. The next size down, the 51209, has a bore of 45 mm and a dynamic rating of 39 kN. The next size up, the 51211, has a bore of 55 mm and a rating of 58.5 kN (+18%).
Common problems on bearings like the 51210
Most field failures trace back to lubrication, contamination, fits and alignment rather than the bearing itself. These guides explain how to recognise and prevent them:
Questions about the 51210
What are the dimensions of a 51210 bearing?
The 51210 has a bore of 50 mm and an outside diameter of 78 mm. It is a single-direction thrust ball bearing. Series: 512 light-medium.
What is the load rating of a 51210 bearing?
In the Rotec AI catalogue the 51210 has a basic dynamic load rating C of 49.4 kN and a basic static load rating C0 of 116 kN. Always confirm against the manufacturer's current catalogue.
What is the equivalent of a 51210 bearing?
Use the Cross-Reference tool in Rotec AI to check brand equivalents for the 51210.