51240 M bearing
200 × 280 mm · dynamic rating 338 kN · static rating 1320 kN. Dimensions, load ratings, designation meaning, life estimates and equivalent parts.
51240 M specification
| Designation | 51240 M |
| Type | Single-direction thrust ball bearing |
| Series | 512 light-medium |
| Bore diameter d | 200 mm |
| Outside diameter D | 280 mm |
| Basic dynamic load rating C | 338 kN (338,000 N) |
| Basic static load rating C0 | 1320 kN (1,320,000 N) |
| Ratio C0/C | 3.91 |
| Speed guide, grease lubrication | 1,500 rpm |
| Life exponent p | 3 (ball bearing) |
Values come from the Rotec AI bearing catalogue and are indicative. Confirm against the manufacturer's current catalogue before ordering. Not every dimension (such as width) is listed here.
What the designation 51240 M means
| Code | Meaning |
|---|---|
| 512 | Single-direction thrust ball bearing, light-medium series (flat seat washers) |
| 40 M | bore code "40 M" = 40 × 5 = 200 mm |
Basic rating life of the 51240 M
Basic rating life is L10 = (C / P)p million revolutions, where P is the equivalent dynamic load and p = 3 (ball bearing). For a 51240 M with C = 338 kN, the table shows what that gives at different load levels. It is the ISO 281 basic life only: it does not include lubrication, contamination, misalignment or reliability modifiers.
| C / P | P as share of C | L10 (million rev) | L10 at 1,500 rpm | L10 at 3,000 rpm |
|---|---|---|---|---|
| 3 | 33.3% | 27 | 300 | 150 |
| 5 | 20.0% | 125 | 1,400 | 690 |
| 8 | 12.5% | 512 | 5,700 | 2,800 |
| 12 | 8.3% | 1,728 | 19,200 | 9,600 |
For example, a C / P of 5 means the equivalent load is 67.6 kN on this bearing. Use the Load Calculator to work out P for your actual radial and axial loads.
Equivalents of the 51240 M
Brand-by-brand equivalents for this exact designation are not yet in the Rotec AI cross-reference tables. The Cross-Reference tool accepts SKF, FAG, NSK, NTN, Timken, Koyo and NRB designations, and shows what is catalogued.
Where the 51240 M is used
Thrust ball / thrust roller bearings are chosen for: Predominantly axial load. Typical equipment: Vertical pumps, extruders, turbines, marine and heavy gear drives. Thrust roller for higher axial capacity and shock.
Other sizes in the same series
The 51240 M is size 28 of 28 in the Rotec AI catalogue for the “512 light-medium” series. The next size down, the 51238 M, has a bore of 190 mm and a dynamic rating of 332 kN.
Common problems on bearings like the 51240 M
Most field failures trace back to lubrication, contamination, fits and alignment rather than the bearing itself. These guides explain how to recognise and prevent them:
Questions about the 51240 M
What are the dimensions of a 51240 M bearing?
The 51240 M has a bore of 200 mm and an outside diameter of 280 mm. It is a single-direction thrust ball bearing. Series: 512 light-medium.
What is the load rating of a 51240 M bearing?
In the Rotec AI catalogue the 51240 M has a basic dynamic load rating C of 338 kN and a basic static load rating C0 of 1320 kN. Always confirm against the manufacturer's current catalogue.
What is the equivalent of a 51240 M bearing?
Brand equivalents for the 51240 M are not yet in the Rotec AI tables. Use the Cross-Reference tool to check other designations.