30213 bearing
65 × 120 mm · dynamic rating 141 kN · static rating 134 kN. Dimensions, load ratings, designation meaning, life estimates and equivalent parts.
30213 specification
| Designation | 30213 |
| Type | Tapered roller bearing |
| Series | 302 standard-angle |
| Bore diameter d | 65 mm |
| Outside diameter D | 120 mm |
| Basic dynamic load rating C | 141 kN (141,000 N) |
| Basic static load rating C0 | 134 kN (134,000 N) |
| Ratio C0/C | 0.95 |
| Speed guide, grease lubrication | 5,600 rpm |
| Life exponent p | 10/3 (roller bearing) |
Values come from the Rotec AI bearing catalogue and are indicative. Confirm against the manufacturer's current catalogue before ordering. Not every dimension (such as width) is listed here.
What the designation 30213 means
| Code | Meaning |
|---|---|
| 302 | Tapered roller bearing, standard contact angle series |
| 13 | bore code "13" = 13 × 5 = 65 mm |
Basic rating life of the 30213
Basic rating life is L10 = (C / P)p million revolutions, where P is the equivalent dynamic load and p = 10/3 (roller bearing). For a 30213 with C = 141 kN, the table shows what that gives at different load levels. It is the ISO 281 basic life only: it does not include lubrication, contamination, misalignment or reliability modifiers.
| C / P | P as share of C | L10 (million rev) | L10 at 1,500 rpm | L10 at 3,000 rpm |
|---|---|---|---|---|
| 3 | 33.3% | 39 | 430 | 220 |
| 5 | 20.0% | 214 | 2,400 | 1,200 |
| 8 | 12.5% | 1,024 | 11,400 | 5,700 |
| 12 | 8.3% | 3,956 | 44,000 | 22,000 |
For example, a C / P of 5 means the equivalent load is 28.2 kN on this bearing. Use the Load Calculator to work out P for your actual radial and axial loads.
Equivalents of the 30213
Brand-by-brand equivalents for this exact designation are not yet in the Rotec AI cross-reference tables. The Cross-Reference tool accepts SKF, FAG, NSK, NTN, Timken, Koyo and NRB designations, and shows what is catalogued.
Where the 30213 is used
Tapered roller bearings are chosen for: Combined radial and axial load; stiffness. Typical equipment: Wheel hubs, gearboxes, rail wheelsets, construction/agri equipment. Usually adjusted/preloaded; paired arrangements common.
Other sizes in the same series
The 30213 is size 12 of 28 in the Rotec AI catalogue for the “302 standard-angle” series. The next size down, the 30212, has a bore of 60 mm and a dynamic rating of 120 kN. The next size up, the 30214, has a bore of 70 mm and a rating of 155 kN (+10%).
Common problems on bearings like the 30213
Most field failures trace back to lubrication, contamination, fits and alignment rather than the bearing itself. These guides explain how to recognise and prevent them:
Questions about the 30213
What are the dimensions of a 30213 bearing?
The 30213 has a bore of 65 mm and an outside diameter of 120 mm. It is a tapered roller bearing. Series: 302 standard-angle.
What is the load rating of a 30213 bearing?
In the Rotec AI catalogue the 30213 has a basic dynamic load rating C of 141 kN and a basic static load rating C0 of 134 kN. Always confirm against the manufacturer's current catalogue.
What is the equivalent of a 30213 bearing?
Brand equivalents for the 30213 are not yet in the Rotec AI tables. Use the Cross-Reference tool to check other designations.