30222 bearing
110 × 200 mm · dynamic rating 327 kN · static rating 405 kN. Dimensions, load ratings, designation meaning, life estimates and equivalent parts.
30222 specification
| Designation | 30222 |
| Type | Tapered roller bearing |
| Series | 302 standard-angle |
| Bore diameter d | 110 mm |
| Outside diameter D | 200 mm |
| Basic dynamic load rating C | 327 kN (327,000 N) |
| Basic static load rating C0 | 405 kN (405,000 N) |
| Ratio C0/C | 1.24 |
| Speed guide, grease lubrication | 3,200 rpm |
| Life exponent p | 10/3 (roller bearing) |
Values come from the Rotec AI bearing catalogue and are indicative. Confirm against the manufacturer's current catalogue before ordering. Not every dimension (such as width) is listed here.
What the designation 30222 means
| Code | Meaning |
|---|---|
| 302 | Tapered roller bearing, standard contact angle series |
| 22 | bore code "22" = 22 × 5 = 110 mm |
Basic rating life of the 30222
Basic rating life is L10 = (C / P)p million revolutions, where P is the equivalent dynamic load and p = 10/3 (roller bearing). For a 30222 with C = 327 kN, the table shows what that gives at different load levels. It is the ISO 281 basic life only: it does not include lubrication, contamination, misalignment or reliability modifiers.
| C / P | P as share of C | L10 (million rev) | L10 at 1,500 rpm | L10 at 3,000 rpm |
|---|---|---|---|---|
| 3 | 33.3% | 39 | 430 | 220 |
| 5 | 20.0% | 214 | 2,400 | 1,200 |
| 8 | 12.5% | 1,024 | 11,400 | 5,700 |
| 12 | 8.3% | 3,956 | 44,000 | 22,000 |
For example, a C / P of 5 means the equivalent load is 65.4 kN on this bearing. Use the Load Calculator to work out P for your actual radial and axial loads.
Equivalents of the 30222
Brand-by-brand equivalents for this exact designation are not shown here. The Cross-Reference tool accepts SKF, FAG, NSK, NTN, Timken, Koyo and NRB designations, and shows what is catalogued.
Where the 30222 is used
Tapered roller bearings are chosen for: Combined radial and axial load; stiffness. Typical equipment: Wheel hubs, gearboxes, rail wheelsets, construction/agri equipment. Usually adjusted/preloaded; paired arrangements common.
Other sizes in the same series
The 30222 belongs to the “302 standard-angle” series. The next size down, the 30220, has a bore of 100 mm and a dynamic rating of 304 kN. The next size up, the 30224, has a bore of 120 mm and a rating of 417 kN (+28%).
Common problems on bearings like the 30222
Most field failures trace back to lubrication, contamination, fits and alignment rather than the bearing itself. These guides explain how to recognise and prevent them:
Questions about the 30222
What are the dimensions of a 30222 bearing?
The 30222 has a bore of 110 mm and an outside diameter of 200 mm. It is a tapered roller bearing. Series: 302 standard-angle.
What is the load rating of a 30222 bearing?
In the Rotec AI catalogue the 30222 has a basic dynamic load rating C of 327 kN and a basic static load rating C0 of 405 kN. Always confirm against the manufacturer's current catalogue.
What is the equivalent of a 30222 bearing?
Use the Cross-Reference tool in Rotec AI to check brand equivalents for the 30222.