NU 316 ECP bearing
80 × 170 mm · dynamic rating 300 kN · static rating 290 kN. Dimensions, load ratings, designation meaning, life estimates and equivalent parts.
NU 316 ECP specification
| Designation | NU 316 ECP |
| Type | Cylindrical roller bearing |
| Series | NU3 medium |
| Bore diameter d | 80 mm |
| Outside diameter D | 170 mm |
| Basic dynamic load rating C | 300 kN (300,000 N) |
| Basic static load rating C0 | 290 kN (290,000 N) |
| Ratio C0/C | 0.97 |
| Speed guide, grease lubrication | 5,000 rpm |
| Life exponent p | 10/3 (roller bearing) |
Values come from the Rotec AI bearing catalogue and are indicative. Confirm against the manufacturer's current catalogue before ordering. Not every dimension (such as width) is listed here.
What the designation NU 316 ECP means
| Code | Meaning |
|---|---|
| NU | No flange on the inner ring, two flanges on the outer ring — inner ring can float axially |
| 316 | medium dimension series — bore code "16" = 16 × 5 = 80 mm |
| EC | Optimized internal design with more and/or larger rollers |
| P | Glass-fibre-reinforced PA66 cage, roller-centred |
Basic rating life of the NU 316 ECP
Basic rating life is L10 = (C / P)p million revolutions, where P is the equivalent dynamic load and p = 10/3 (roller bearing). For a NU 316 ECP with C = 300 kN, the table shows what that gives at different load levels. It is the ISO 281 basic life only: it does not include lubrication, contamination, misalignment or reliability modifiers.
| C / P | P as share of C | L10 (million rev) | L10 at 1,500 rpm | L10 at 3,000 rpm |
|---|---|---|---|---|
| 3 | 33.3% | 39 | 430 | 220 |
| 5 | 20.0% | 214 | 2,400 | 1,200 |
| 8 | 12.5% | 1,024 | 11,400 | 5,700 |
| 12 | 8.3% | 3,956 | 44,000 | 22,000 |
For example, a C / P of 5 means the equivalent load is 60 kN on this bearing. Use the Load Calculator to work out P for your actual radial and axial loads.
Equivalents of the NU 316 ECP
Brand-by-brand equivalents for this exact designation are not yet in the Rotec AI cross-reference tables. The Cross-Reference tool accepts SKF, FAG, NSK, NTN, Timken, Koyo and NRB designations, and shows what is catalogued.
Where the NU 316 ECP is used
Cylindrical roller bearings are chosen for: High radial load and high speed; separable arrangements. Typical equipment: Gearboxes, traction motors, rolling mills, generators. Some variants carry axial load; common in railway drive systems.
Other sizes in the same series
The NU 316 ECP is size 14 of 18 in the Rotec AI catalogue for the “NU3 medium” series. The next size down, the NU 315 ECP, has a bore of 75 mm and a dynamic rating of 280 kN. The next size up, the NU 317 ECP, has a bore of 85 mm and a rating of 340 kN (+13%).
Common problems on bearings like the NU 316 ECP
Most field failures trace back to lubrication, contamination, fits and alignment rather than the bearing itself. These guides explain how to recognise and prevent them:
Questions about the NU 316 ECP
What are the dimensions of a NU 316 ECP bearing?
The NU 316 ECP has a bore of 80 mm and an outside diameter of 170 mm. It is a cylindrical roller bearing. Series: NU3 medium.
What is the load rating of a NU 316 ECP bearing?
In the Rotec AI catalogue the NU 316 ECP has a basic dynamic load rating C of 300 kN and a basic static load rating C0 of 290 kN. Always confirm against the manufacturer's current catalogue.
What is the equivalent of a NU 316 ECP bearing?
Brand equivalents for the NU 316 ECP are not yet in the Rotec AI tables. Use the Cross-Reference tool to check other designations.