51316 bearing
80 × 140 mm · dynamic rating 159 kN · static rating 390 kN. Dimensions, load ratings, designation meaning, life estimates and equivalent parts.
51316 specification
| Designation | 51316 |
| Type | Single-direction thrust ball bearing |
| Series | 513 medium |
| Bore diameter d | 80 mm |
| Outside diameter D | 140 mm |
| Basic dynamic load rating C | 159 kN (159,000 N) |
| Basic static load rating C0 | 390 kN (390,000 N) |
| Ratio C0/C | 2.45 |
| Speed guide, grease lubrication | 2,400 rpm |
| Life exponent p | 3 (ball bearing) |
Values come from the Rotec AI bearing catalogue and are indicative. Confirm against the manufacturer's current catalogue before ordering. Not every dimension (such as width) is listed here.
What the designation 51316 means
| Code | Meaning |
|---|---|
| 513 | Single-direction thrust ball bearing, medium series (flat seat washers) |
| 16 | bore code "16" = 16 × 5 = 80 mm |
Basic rating life of the 51316
Basic rating life is L10 = (C / P)p million revolutions, where P is the equivalent dynamic load and p = 3 (ball bearing). For a 51316 with C = 159 kN, the table shows what that gives at different load levels. It is the ISO 281 basic life only: it does not include lubrication, contamination, misalignment or reliability modifiers.
| C / P | P as share of C | L10 (million rev) | L10 at 1,500 rpm | L10 at 3,000 rpm |
|---|---|---|---|---|
| 3 | 33.3% | 27 | 300 | 150 |
| 5 | 20.0% | 125 | 1,400 | 690 |
| 8 | 12.5% | 512 | 5,700 | 2,800 |
| 12 | 8.3% | 1,728 | 19,200 | 9,600 |
For example, a C / P of 5 means the equivalent load is 31.8 kN on this bearing. Use the Load Calculator to work out P for your actual radial and axial loads.
Equivalents of the 51316
Brand-by-brand equivalents for this exact designation are not shown here. The Cross-Reference tool accepts SKF, FAG, NSK, NTN, Timken, Koyo and NRB designations, and shows what is catalogued.
Where the 51316 is used
Thrust ball / thrust roller bearings are chosen for: Predominantly axial load. Typical equipment: Vertical pumps, extruders, turbines, marine and heavy gear drives. Thrust roller for higher axial capacity and shock.
Other sizes in the same series
The 51316 belongs to the “513 medium” series. The next size down, the 51315, has a bore of 75 mm and a dynamic rating of 163 kN. The next size up, the 51317, has a bore of 85 mm and a rating of 174 kN (+9%).
Common problems on bearings like the 51316
Most field failures trace back to lubrication, contamination, fits and alignment rather than the bearing itself. These guides explain how to recognise and prevent them:
Questions about the 51316
What are the dimensions of a 51316 bearing?
The 51316 has a bore of 80 mm and an outside diameter of 140 mm. It is a single-direction thrust ball bearing. Series: 513 medium.
What is the load rating of a 51316 bearing?
In the Rotec AI catalogue the 51316 has a basic dynamic load rating C of 159 kN and a basic static load rating C0 of 390 kN. Always confirm against the manufacturer's current catalogue.
What is the equivalent of a 51316 bearing?
Use the Cross-Reference tool in Rotec AI to check brand equivalents for the 51316.