22216 E bearing
80 × 140 mm · dynamic rating 243 kN · static rating 270 kN. Dimensions, load ratings, designation meaning, life estimates and equivalent parts.
22216 E specification
| Designation | 22216 E |
| Type | Spherical roller bearing |
| Series | 222 light |
| Bore diameter d | 80 mm |
| Outside diameter D | 140 mm |
| Basic dynamic load rating C | 243 kN (243,000 N) |
| Basic static load rating C0 | 270 kN (270,000 N) |
| Ratio C0/C | 1.11 |
| Speed guide, grease lubrication | 6,000 rpm |
| Life exponent p | 10/3 (roller bearing) |
Values come from the Rotec AI bearing catalogue and are indicative. Confirm against the manufacturer's current catalogue before ordering. Not every dimension (such as width) is listed here.
What the designation 22216 E means
| Code | Meaning |
|---|---|
| 222 | Spherical roller bearing, double row self-aligning, light series |
| 16 | bore code "16" = 16 × 5 = 80 mm |
| E | Optimized internal design |
Basic rating life of the 22216 E
Basic rating life is L10 = (C / P)p million revolutions, where P is the equivalent dynamic load and p = 10/3 (roller bearing). For a 22216 E with C = 243 kN, the table shows what that gives at different load levels. It is the ISO 281 basic life only: it does not include lubrication, contamination, misalignment or reliability modifiers.
| C / P | P as share of C | L10 (million rev) | L10 at 1,500 rpm | L10 at 3,000 rpm |
|---|---|---|---|---|
| 3 | 33.3% | 39 | 430 | 220 |
| 5 | 20.0% | 214 | 2,400 | 1,200 |
| 8 | 12.5% | 1,024 | 11,400 | 5,700 |
| 12 | 8.3% | 3,956 | 44,000 | 22,000 |
For example, a C / P of 5 means the equivalent load is 48.6 kN on this bearing. Use the Load Calculator to work out P for your actual radial and axial loads.
Equivalents of the 22216 E from other brands
These parts share the main boundary dimensions of the 22216 E and are commonly used as its equivalent. Published load ratings differ a little between makers because internal designs differ.
| Brand | Part | C (kN) | C0 (kN) | Dynamic rating vs SKF |
|---|---|---|---|---|
| SKF | 22216 E | 243 | 270 | Reference |
| FAG | 22216-E1 | 249 | 270 | 102% of SKF |
Check clearance class, cage, seals and any special suffix before ordering. A matching main size does not guarantee the parts are interchangeable in every detail.
Where the 22216 E is used
Spherical roller bearings are chosen for: Very high radial load with misalignment capability. Typical equipment: Crushers, mills, conveyors, wind main shafts, paper machines. Robust for shock/dust; lubrication and sealing are crucial.
Other sizes in the same series
The 22216 E belongs to the “222 light” series. The next size down, the 22215 E, has a bore of 75 mm and a dynamic rating of 217 kN. The next size up, the 22217 E, has a bore of 85 mm and a rating of 291 kN (+20%).
Common problems on bearings like the 22216 E
Most field failures trace back to lubrication, contamination, fits and alignment rather than the bearing itself. These guides explain how to recognise and prevent them:
Questions about the 22216 E
What are the dimensions of a 22216 E bearing?
The 22216 E has a bore of 80 mm and an outside diameter of 140 mm. It is a spherical roller bearing. Series: 222 light.
What is the load rating of a 22216 E bearing?
In the Rotec AI catalogue the 22216 E has a basic dynamic load rating C of 243 kN and a basic static load rating C0 of 270 kN. Always confirm against the manufacturer's current catalogue.
What is the equivalent of a 22216 E bearing?
Equivalent parts include FAG 22216-E1. Check clearance, cage and seal suffixes before substituting.