NK 95/36 bearing
95 × 115 mm · dynamic rating 105 kN · static rating 232 kN. Dimensions, load ratings, designation meaning, life estimates and equivalent parts.
NK 95/36 specification
| Designation | NK 95/36 |
| Type | Needle roller bearing |
| Series | — |
| Bore diameter d | 95 mm |
| Outside diameter D | 115 mm |
| Basic dynamic load rating C | 105 kN (105,000 N) |
| Basic static load rating C0 | 232 kN (232,000 N) |
| Ratio C0/C | 2.21 |
| Speed guide, grease lubrication | 4,800 rpm |
| Life exponent p | 10/3 (roller bearing) |
Values come from the Rotec AI bearing catalogue and are indicative. Confirm against the manufacturer's current catalogue before ordering. Not every dimension (such as width) is listed here.
What the designation NK 95/36 means
| Code | Meaning |
|---|---|
| NK | Needle roller bearing, machined ring with flange, no inner ring — the hardened/ground shaft itself serves as the inner raceway |
| 95 | Bore (Fw) = 95 mm — stated directly, not a bore code |
| 36 | Bearing width = 36 mm — stated directly |
Basic rating life of the NK 95/36
Basic rating life is L10 = (C / P)p million revolutions, where P is the equivalent dynamic load and p = 10/3 (roller bearing). For a NK 95/36 with C = 105 kN, the table shows what that gives at different load levels. It is the ISO 281 basic life only: it does not include lubrication, contamination, misalignment or reliability modifiers.
| C / P | P as share of C | L10 (million rev) | L10 at 1,500 rpm | L10 at 3,000 rpm |
|---|---|---|---|---|
| 3 | 33.3% | 39 | 430 | 220 |
| 5 | 20.0% | 214 | 2,400 | 1,200 |
| 8 | 12.5% | 1,024 | 11,400 | 5,700 |
| 12 | 8.3% | 3,956 | 44,000 | 22,000 |
For example, a C / P of 5 means the equivalent load is 21 kN on this bearing. Use the Load Calculator to work out P for your actual radial and axial loads.
Equivalents of the NK 95/36
Brand-by-brand equivalents for this exact designation are not yet in the Rotec AI cross-reference tables. The Cross-Reference tool accepts SKF, FAG, NSK, NTN, Timken, Koyo and NRB designations, and shows what is catalogued.
Where the NK 95/36 is used
Needle roller bearings are chosen for: High radial load in limited radial space. Typical equipment: Transmissions, actuators, mobile equipment, compact machinery. Requires hardened raceways or inner ring; alignment sensitivity.
Other sizes in the same series
The NK 95/36 is size 18 of 24 in the Rotec AI catalogue for the “” series. The next size down, the NK 90/35, has a bore of 90 mm and a dynamic rating of 101 kN. The next size up, the NK 100/36, has a bore of 100 mm and a rating of 108 kN (+3%).
Common problems on bearings like the NK 95/36
Most field failures trace back to lubrication, contamination, fits and alignment rather than the bearing itself. These guides explain how to recognise and prevent them:
Questions about the NK 95/36
What are the dimensions of a NK 95/36 bearing?
The NK 95/36 has a bore of 95 mm and an outside diameter of 115 mm. It is a needle roller bearing.
What is the load rating of a NK 95/36 bearing?
In the Rotec AI catalogue the NK 95/36 has a basic dynamic load rating C of 105 kN and a basic static load rating C0 of 232 kN. Always confirm against the manufacturer's current catalogue.
What is the equivalent of a NK 95/36 bearing?
Brand equivalents for the NK 95/36 are not yet in the Rotec AI tables. Use the Cross-Reference tool to check other designations.