NK 110/40 bearing
110 × 130 mm · dynamic rating 123 kN · static rating 305 kN. Dimensions, load ratings, designation meaning, life estimates and equivalent parts.
NK 110/40 specification
| Designation | NK 110/40 |
| Type | Needle roller bearing |
| Series | — |
| Bore diameter d | 110 mm |
| Outside diameter D | 130 mm |
| Basic dynamic load rating C | 123 kN (123,000 N) |
| Basic static load rating C0 | 305 kN (305,000 N) |
| Ratio C0/C | 2.48 |
| Speed guide, grease lubrication | 4,000 rpm |
| Life exponent p | 10/3 (roller bearing) |
Values come from the Rotec AI bearing catalogue and are indicative. Confirm against the manufacturer's current catalogue before ordering. Not every dimension (such as width) is listed here.
What the designation NK 110/40 means
| Code | Meaning |
|---|---|
| NK | Needle roller bearing, machined ring with flange, no inner ring — the hardened/ground shaft itself serves as the inner raceway |
| 110 | Bore (Fw) = 110 mm — stated directly, not a bore code |
| 40 | Bearing width = 40 mm — stated directly |
Basic rating life of the NK 110/40
Basic rating life is L10 = (C / P)p million revolutions, where P is the equivalent dynamic load and p = 10/3 (roller bearing). For a NK 110/40 with C = 123 kN, the table shows what that gives at different load levels. It is the ISO 281 basic life only: it does not include lubrication, contamination, misalignment or reliability modifiers.
| C / P | P as share of C | L10 (million rev) | L10 at 1,500 rpm | L10 at 3,000 rpm |
|---|---|---|---|---|
| 3 | 33.3% | 39 | 430 | 220 |
| 5 | 20.0% | 214 | 2,400 | 1,200 |
| 8 | 12.5% | 1,024 | 11,400 | 5,700 |
| 12 | 8.3% | 3,956 | 44,000 | 22,000 |
For example, a C / P of 5 means the equivalent load is 24.6 kN on this bearing. Use the Load Calculator to work out P for your actual radial and axial loads.
Equivalents of the NK 110/40
Brand-by-brand equivalents for this exact designation are not shown here. The Cross-Reference tool accepts SKF, FAG, NSK, NTN, Timken, Koyo and NRB designations, and shows what is catalogued.
Where the NK 110/40 is used
Needle roller bearings are chosen for: High radial load in limited radial space. Typical equipment: Transmissions, actuators, mobile equipment, compact machinery. Requires hardened raceways or inner ring; alignment sensitivity.
Other sizes in the same series
The NK 110/40 belongs to the “” series. The next size down, the NK 100/36, has a bore of 100 mm and a dynamic rating of 108 kN. The next size up, the RNA 4822, has a bore of 120 mm and a rating of 93.5 kN (-24%).
Common problems on bearings like the NK 110/40
Most field failures trace back to lubrication, contamination, fits and alignment rather than the bearing itself. These guides explain how to recognise and prevent them:
Questions about the NK 110/40
What are the dimensions of a NK 110/40 bearing?
The NK 110/40 has a bore of 110 mm and an outside diameter of 130 mm. It is a needle roller bearing.
What is the load rating of a NK 110/40 bearing?
In the Rotec AI catalogue the NK 110/40 has a basic dynamic load rating C of 123 kN and a basic static load rating C0 of 305 kN. Always confirm against the manufacturer's current catalogue.
What is the equivalent of a NK 110/40 bearing?
Use the Cross-Reference tool in Rotec AI to check brand equivalents for the NK 110/40.