NK 80/35 bearing
80 × 95 mm · dynamic rating 76.5 kN · static rating 190 kN. Dimensions, load ratings, designation meaning, life estimates and equivalent parts.
NK 80/35 specification
| Designation | NK 80/35 |
| Type | Needle roller bearing |
| Series | — |
| Bore diameter d | 80 mm |
| Outside diameter D | 95 mm |
| Basic dynamic load rating C | 76.5 kN (76,500 N) |
| Basic static load rating C0 | 190 kN (190,000 N) |
| Ratio C0/C | 2.48 |
| Speed guide, grease lubrication | 5,600 rpm |
| Life exponent p | 10/3 (roller bearing) |
Values come from the Rotec AI bearing catalogue and are indicative. Confirm against the manufacturer's current catalogue before ordering. Not every dimension (such as width) is listed here.
What the designation NK 80/35 means
| Code | Meaning |
|---|---|
| NK | Needle roller bearing, machined ring with flange, no inner ring — the hardened/ground shaft itself serves as the inner raceway |
| 80 | Bore (Fw) = 80 mm — stated directly, not a bore code |
| 35 | Bearing width = 35 mm — stated directly |
Basic rating life of the NK 80/35
Basic rating life is L10 = (C / P)p million revolutions, where P is the equivalent dynamic load and p = 10/3 (roller bearing). For a NK 80/35 with C = 76.5 kN, the table shows what that gives at different load levels. It is the ISO 281 basic life only: it does not include lubrication, contamination, misalignment or reliability modifiers.
| C / P | P as share of C | L10 (million rev) | L10 at 1,500 rpm | L10 at 3,000 rpm |
|---|---|---|---|---|
| 3 | 33.3% | 39 | 430 | 220 |
| 5 | 20.0% | 214 | 2,400 | 1,200 |
| 8 | 12.5% | 1,024 | 11,400 | 5,700 |
| 12 | 8.3% | 3,956 | 44,000 | 22,000 |
For example, a C / P of 5 means the equivalent load is 15.3 kN on this bearing. Use the Load Calculator to work out P for your actual radial and axial loads.
Equivalents of the NK 80/35
Brand-by-brand equivalents for this exact designation are not yet in the Rotec AI cross-reference tables. The Cross-Reference tool accepts SKF, FAG, NSK, NTN, Timken, Koyo and NRB designations, and shows what is catalogued.
Where the NK 80/35 is used
Needle roller bearings are chosen for: High radial load in limited radial space. Typical equipment: Transmissions, actuators, mobile equipment, compact machinery. Requires hardened raceways or inner ring; alignment sensitivity.
Other sizes in the same series
The NK 80/35 is size 15 of 24 in the Rotec AI catalogue for the “” series. The next size down, the NK 75/35, has a bore of 75 mm and a dynamic rating of 74.8 kN. The next size up, the NK 85/35, has a bore of 85 mm and a rating of 96.8 kN (+27%).
Common problems on bearings like the NK 80/35
Most field failures trace back to lubrication, contamination, fits and alignment rather than the bearing itself. These guides explain how to recognise and prevent them:
Questions about the NK 80/35
What are the dimensions of a NK 80/35 bearing?
The NK 80/35 has a bore of 80 mm and an outside diameter of 95 mm. It is a needle roller bearing.
What is the load rating of a NK 80/35 bearing?
In the Rotec AI catalogue the NK 80/35 has a basic dynamic load rating C of 76.5 kN and a basic static load rating C0 of 190 kN. Always confirm against the manufacturer's current catalogue.
What is the equivalent of a NK 80/35 bearing?
Brand equivalents for the NK 80/35 are not yet in the Rotec AI tables. Use the Cross-Reference tool to check other designations.