7319 BEP /DB bearing
95 × 200 mm · dynamic rating 272.16 kN · static rating 300 kN. Dimensions, load ratings, designation meaning, life estimates and equivalent parts.
7319 BEP /DB specification
| Designation | 7319 BEP /DB |
| Type | Matched pair of angular contact ball bearings (back-to-back) |
| Series | 73 medium (pair) |
| Bore diameter d | 95 mm |
| Outside diameter D | 200 mm |
| Basic dynamic load rating C | 272.16 kN (272,160 N) |
| Basic static load rating C0 | 300 kN (300,000 N) |
| Ratio C0/C | 1.10 |
| Speed guide, grease lubrication | 3,420 rpm |
| Life exponent p | 3 (ball bearing) |
Values come from the Rotec AI bearing catalogue and are indicative. Confirm against the manufacturer's current catalogue before ordering. Not every dimension (such as width) is listed here.
What the designation 7319 BEP /DB means
| Code | Meaning |
|---|---|
| 73 | Angular contact ball bearing, medium dimension series |
| 19 | bore code "19" = 19 × 5 = 95 mm |
| B | 40° contact angle |
| E | Optimized internal design |
| P | Glass-fibre-reinforced PA66 cage, ball-centred |
| /DB | Two bearings mounted back-to-back as a matched pair — carries combined radial + axial load from both directions with high stiffness |
Basic rating life of the 7319 BEP /DB
Basic rating life is L10 = (C / P)p million revolutions, where P is the equivalent dynamic load and p = 3 (ball bearing). For a 7319 BEP /DB with C = 272.16 kN, the table shows what that gives at different load levels. It is the ISO 281 basic life only: it does not include lubrication, contamination, misalignment or reliability modifiers.
| C / P | P as share of C | L10 (million rev) | L10 at 1,500 rpm | L10 at 3,000 rpm |
|---|---|---|---|---|
| 3 | 33.3% | 27 | 300 | 150 |
| 5 | 20.0% | 125 | 1,400 | 690 |
| 8 | 12.5% | 512 | 5,700 | 2,800 |
| 12 | 8.3% | 1,728 | 19,200 | 9,600 |
For example, a C / P of 5 means the equivalent load is 54.43 kN on this bearing. Use the Load Calculator to work out P for your actual radial and axial loads.
Equivalents of the 7319 BEP /DB
Brand-by-brand equivalents for this exact designation are not shown here. The Cross-Reference tool accepts SKF, FAG, NSK, NTN, Timken, Koyo and NRB designations, and shows what is catalogued.
Where the 7319 BEP /DB is used
Angular-contact ball bearings are chosen for: Combined radial and axial load; precision/high-speed arrangements. Typical equipment: Pumps, compressors, spindles, generators, aerospace accessories. Often paired/preloaded; contact angle and lubrication matter.
Other sizes in the same series
The 7319 BEP /DB belongs to the “73 medium (pair)” series. The next size down, the 7318 BEP /DB, has a bore of 90 mm and a dynamic rating of 252.72 kN. The next size up, the 7320 BEP /DB, has a bore of 100 mm and a rating of 328.86 kN (+21%).
Common problems on bearings like the 7319 BEP /DB
Most field failures trace back to lubrication, contamination, fits and alignment rather than the bearing itself. These guides explain how to recognise and prevent them:
Questions about the 7319 BEP /DB
What are the dimensions of a 7319 BEP /DB bearing?
The 7319 BEP /DB has a bore of 95 mm and an outside diameter of 200 mm. It is a matched pair of angular contact ball bearings (back-to-back). Series: 73 medium (pair).
What is the load rating of a 7319 BEP /DB bearing?
In the Rotec AI catalogue the 7319 BEP /DB has a basic dynamic load rating C of 272.16 kN and a basic static load rating C0 of 300 kN. Always confirm against the manufacturer's current catalogue.
What is the equivalent of a 7319 BEP /DB bearing?
Use the Cross-Reference tool in Rotec AI to check brand equivalents for the 7319 BEP /DB.