7301 BEP /DB bearing
12 × 37 mm · dynamic rating 17.17 kN · static rating 10 kN. Dimensions, load ratings, designation meaning, life estimates and equivalent parts.
7301 BEP /DB specification
| Designation | 7301 BEP /DB |
| Type | Matched pair of angular contact ball bearings (back-to-back) |
| Series | 73 medium (pair) |
| Bore diameter d | 12 mm |
| Outside diameter D | 37 mm |
| Basic dynamic load rating C | 17.17 kN (17,172 N) |
| Basic static load rating C0 | 10 kN (10,000 N) |
| Ratio C0/C | 0.58 |
| Speed guide, grease lubrication | 21,600 rpm |
| Life exponent p | 3 (ball bearing) |
Values come from the Rotec AI bearing catalogue and are indicative. Confirm against the manufacturer's current catalogue before ordering. Not every dimension (such as width) is listed here.
What the designation 7301 BEP /DB means
| Code | Meaning |
|---|---|
| 73 | Angular contact ball bearing, medium dimension series |
| 01 | bore code "01" = 12 mm (one of the four fixed small-bore codes, not the ×5 rule) |
| B | 40° contact angle |
| E | Optimized internal design |
| P | Glass-fibre-reinforced PA66 cage, ball-centred |
| /DB | Two bearings mounted back-to-back as a matched pair — carries combined radial + axial load from both directions with high stiffness |
Basic rating life of the 7301 BEP /DB
Basic rating life is L10 = (C / P)p million revolutions, where P is the equivalent dynamic load and p = 3 (ball bearing). For a 7301 BEP /DB with C = 17.17 kN, the table shows what that gives at different load levels. It is the ISO 281 basic life only: it does not include lubrication, contamination, misalignment or reliability modifiers.
| C / P | P as share of C | L10 (million rev) | L10 at 1,500 rpm | L10 at 3,000 rpm |
|---|---|---|---|---|
| 3 | 33.3% | 27 | 300 | 150 |
| 5 | 20.0% | 125 | 1,400 | 690 |
| 8 | 12.5% | 512 | 5,700 | 2,800 |
| 12 | 8.3% | 1,728 | 19,200 | 9,600 |
For example, a C / P of 5 means the equivalent load is 3.43 kN on this bearing. Use the Load Calculator to work out P for your actual radial and axial loads.
Equivalents of the 7301 BEP /DB
Brand-by-brand equivalents for this exact designation are not yet in the Rotec AI cross-reference tables. The Cross-Reference tool accepts SKF, FAG, NSK, NTN, Timken, Koyo and NRB designations, and shows what is catalogued.
Where the 7301 BEP /DB is used
Angular-contact ball bearings are chosen for: Combined radial and axial load; precision/high-speed arrangements. Typical equipment: Pumps, compressors, spindles, generators, aerospace accessories. Often paired/preloaded; contact angle and lubrication matter.
Other sizes in the same series
The 7301 BEP /DB is size 1 of 20 in the Rotec AI catalogue for the “73 medium (pair)” series. The next size up, the 7302 BEP /DB, has a bore of 15 mm and a rating of 21.06 kN (+23%).
Common problems on bearings like the 7301 BEP /DB
Most field failures trace back to lubrication, contamination, fits and alignment rather than the bearing itself. These guides explain how to recognise and prevent them:
Questions about the 7301 BEP /DB
What are the dimensions of a 7301 BEP /DB bearing?
The 7301 BEP /DB has a bore of 12 mm and an outside diameter of 37 mm. It is a matched pair of angular contact ball bearings (back-to-back). Series: 73 medium (pair).
What is the load rating of a 7301 BEP /DB bearing?
In the Rotec AI catalogue the 7301 BEP /DB has a basic dynamic load rating C of 17.17 kN and a basic static load rating C0 of 10 kN. Always confirm against the manufacturer's current catalogue.
What is the equivalent of a 7301 BEP /DB bearing?
Brand equivalents for the 7301 BEP /DB are not yet in the Rotec AI tables. Use the Cross-Reference tool to check other designations.