6001 bearing
12 × 28 mm · dynamic rating 5.4 kN · static rating 2.36 kN. Dimensions, load ratings, designation meaning, life estimates and equivalent parts.
6001 specification
| Designation | 6001 |
| Type | Deep groove ball bearing |
| Series | 60 extra-light |
| Bore diameter d | 12 mm |
| Outside diameter D | 28 mm |
| Basic dynamic load rating C | 5.4 kN (5,400 N) |
| Basic static load rating C0 | 2.36 kN (2,360 N) |
| Ratio C0/C | 0.44 |
| Speed guide, grease lubrication | 38,000 rpm |
| Life exponent p | 3 (ball bearing) |
Values come from the Rotec AI bearing catalogue and are indicative. Confirm against the manufacturer's current catalogue before ordering. Not every dimension (such as width) is listed here.
What the designation 6001 means
| Code | Meaning |
|---|---|
| 60 | Deep groove ball bearing, extra-light dimension series |
| 01 | bore code "01" = 12 mm (one of the four fixed small-bore codes, not the ×5 rule) |
Basic rating life of the 6001
Basic rating life is L10 = (C / P)p million revolutions, where P is the equivalent dynamic load and p = 3 (ball bearing). For a 6001 with C = 5.4 kN, the table shows what that gives at different load levels. It is the ISO 281 basic life only: it does not include lubrication, contamination, misalignment or reliability modifiers.
| C / P | P as share of C | L10 (million rev) | L10 at 1,500 rpm | L10 at 3,000 rpm |
|---|---|---|---|---|
| 3 | 33.3% | 27 | 300 | 150 |
| 5 | 20.0% | 125 | 1,400 | 690 |
| 8 | 12.5% | 512 | 5,700 | 2,800 |
| 12 | 8.3% | 1,728 | 19,200 | 9,600 |
For example, a C / P of 5 means the equivalent load is 1.08 kN on this bearing. Use the Load Calculator to work out P for your actual radial and axial loads.
Equivalents of the 6001 from other brands
Deep groove ball bearings follow the ISO basic designation system, so the base number 6001 means the same bore (12 mm) and outside diameter (28 mm) at the major makers. Only the suffixes differ. For sealed versions, common suffixes are -2RS1 or -2Z at SKF, -2RSR or -2ZR at FAG, DDU or ZZ at NSK, and LLU or ZZ at NTN. Check clearance class, grease and seal type before substituting. For brand-specific part numbers, use the Cross-Reference tool.
Where the 6001 is used
Deep-groove ball bearings are chosen for: Radial load with moderate axial load; high-speed compact equipment. Typical equipment: Motors, fans, pumps, gearboxes, auxiliaries. Single/multi-row; insulated or stainless variants available.
Other sizes in the same series
The 6001 belongs to the “60 extra-light” series. The next size down, the 6000, has a bore of 10 mm and a dynamic rating of 4.75 kN. The next size up, the 6002, has a bore of 15 mm and a rating of 5.85 kN (+8%).
Common problems on bearings like the 6001
Most field failures trace back to lubrication, contamination, fits and alignment rather than the bearing itself. These guides explain how to recognise and prevent them:
Questions about the 6001
What are the dimensions of a 6001 bearing?
The 6001 has a bore of 12 mm and an outside diameter of 28 mm. It is a deep groove ball bearing. Series: 60 extra-light.
What is the load rating of a 6001 bearing?
In the Rotec AI catalogue the 6001 has a basic dynamic load rating C of 5.4 kN and a basic static load rating C0 of 2.36 kN. Always confirm against the manufacturer's current catalogue.
What is the equivalent of a 6001 bearing?
Use the Cross-Reference tool in Rotec AI to check brand equivalents for the 6001.