How Rotec AI answers, and where you stay in charge
Rotec AI is built for engineers who have to be right. It gives a recommendation and shows how it got there. It does not act on your plant, and it does not replace the manufacturer's data or your own judgement.
Where each answer comes from
| You ask | The answer comes from | What you see |
|---|---|---|
| Which bearing? | Guided questions about the machine and its duty, mapped to standard bearing types and sizes. | A recommendation, with the designation explained in plain words. |
| Will it last? | The standard rating-life calculation, applied to the numbers you enter. | The inputs, the result, and a warning when life falls short of your target. |
| What is the equivalent? | Published equivalents across 7 brands. | Equivalent designations to confirm with your supplier before you order. |
| Why did it fail? | 23 damage profiles and 96 reference photos, narrowed with your machine details. | Ranked likely causes. Bearing Autopsy is a preliminary guide, not a final diagnosis. |
Three rules we hold ourselves to
- Show the working. Results come with the inputs and the reasoning, so a colleague can check them.
- Say when it is an approximation. Approximations are flagged in plain words, not buried.
- A person decides. Rotec AI advises. Selecting, buying and signing off stay with you.
What Rotec AI does not do
- It does not control, order or change anything on your equipment or in your systems.
- It does not replace manufacturer data, a supplier's confirmation or a qualified engineer.
- It does not read your plant data. It works from what you type in and from its own library.
- It does not make a final failure diagnosis from a photo.
Judge it yourself in 15 minutes
| Step | What to do |
|---|---|
| 1. Pick three | Take three bearings you already know well: a standard selection, a part you substituted before, and a past failure. |
| 2. Run them | Use the Bearing Selector or Verify, Cross-Reference, and Failure Analysis. |
| 3. Compare | Check the results against your supplier's data and your own records, and note the time it took against your usual method. |
| 4. Decide | If it agrees and saves time, keep using it. If it does not, tell us what it got wrong. |
Tell us what it got wrong at tanmay@rotecai.in. We read every message.
Take the result to work
Licence holders can save selected positions and download them as a PDF report. Failure analysis results can also be printed. Either way, the numbers and reasoning travel with the result.
Questions
Is Rotec AI an AI agent?
No. It advises and explains. It does not take actions on your equipment, your orders or your systems, and a person makes every decision.
Can I rely on the cross-reference without checking?
Treat it as a shortlist. Equivalents should be confirmed with your bearing supplier before you order, especially for critical machines.
Does it replace the manufacturer's catalogue?
No. Manufacturer data stays the final reference. Rotec AI helps you reach the right part and the right question faster.
Rotec AI supports engineering judgement. Please confirm critical selections with your bearing supplier.