NU 226 ECP bearing
130 × 230 mm · dynamic rating 415 kN · static rating 455 kN. Dimensions, load ratings, designation meaning, life estimates and equivalent parts.
NU 226 ECP specification
| Designation | NU 226 ECP |
| Type | Cylindrical roller bearing |
| Series | NU2 light |
| Bore diameter d | 130 mm |
| Outside diameter D | 230 mm |
| Basic dynamic load rating C | 415 kN (415,000 N) |
| Basic static load rating C0 | 455 kN (455,000 N) |
| Ratio C0/C | 1.10 |
| Speed guide, grease lubrication | 3,400 rpm |
| Life exponent p | 10/3 (roller bearing) |
Values come from the Rotec AI bearing catalogue and are indicative. Confirm against the manufacturer's current catalogue before ordering. Not every dimension (such as width) is listed here.
What the designation NU 226 ECP means
| Code | Meaning |
|---|---|
| NU | No flange on the inner ring, two flanges on the outer ring — inner ring can float axially |
| 226 | light dimension series — bore code "26" = 26 × 5 = 130 mm |
| EC | Optimized internal design with more and/or larger rollers |
| P | Glass-fibre-reinforced PA66 cage, roller-centred |
Basic rating life of the NU 226 ECP
Basic rating life is L10 = (C / P)p million revolutions, where P is the equivalent dynamic load and p = 10/3 (roller bearing). For a NU 226 ECP with C = 415 kN, the table shows what that gives at different load levels. It is the ISO 281 basic life only: it does not include lubrication, contamination, misalignment or reliability modifiers.
| C / P | P as share of C | L10 (million rev) | L10 at 1,500 rpm | L10 at 3,000 rpm |
|---|---|---|---|---|
| 3 | 33.3% | 39 | 430 | 220 |
| 5 | 20.0% | 214 | 2,400 | 1,200 |
| 8 | 12.5% | 1,024 | 11,400 | 5,700 |
| 12 | 8.3% | 3,956 | 44,000 | 22,000 |
For example, a C / P of 5 means the equivalent load is 83 kN on this bearing. Use the Load Calculator to work out P for your actual radial and axial loads.
Equivalents of the NU 226 ECP
Brand-by-brand equivalents for this exact designation are not shown here. The Cross-Reference tool accepts SKF, FAG, NSK, NTN, Timken, Koyo and NRB designations, and shows what is catalogued.
Where the NU 226 ECP is used
Cylindrical roller bearings are chosen for: High radial load and high speed; separable arrangements. Typical equipment: Gearboxes, traction motors, rolling mills, generators. Some variants carry axial load; common in railway drive systems.
Other sizes in the same series
The NU 226 ECP belongs to the “NU2 light” series. The next size down, the NU 224 ECP, has a bore of 120 mm and a dynamic rating of 390 kN. The next size up, the NU 228 ECM, has a bore of 140 mm and a rating of 450 kN (+8%).
Common problems on bearings like the NU 226 ECP
Most field failures trace back to lubrication, contamination, fits and alignment rather than the bearing itself. These guides explain how to recognise and prevent them:
Questions about the NU 226 ECP
What are the dimensions of a NU 226 ECP bearing?
The NU 226 ECP has a bore of 130 mm and an outside diameter of 230 mm. It is a cylindrical roller bearing. Series: NU2 light.
What is the load rating of a NU 226 ECP bearing?
In the Rotec AI catalogue the NU 226 ECP has a basic dynamic load rating C of 415 kN and a basic static load rating C0 of 455 kN. Always confirm against the manufacturer's current catalogue.
What is the equivalent of a NU 226 ECP bearing?
Use the Cross-Reference tool in Rotec AI to check brand equivalents for the NU 226 ECP.