7320 BEP bearing
100 × 215 mm · dynamic rating 203 kN · static rating 190 kN. Dimensions, load ratings, designation meaning, life estimates and equivalent parts.
7320 BEP specification
| Designation | 7320 BEP |
| Type | Single-row angular contact ball bearing |
| Series | 73 medium |
| Bore diameter d | 100 mm |
| Outside diameter D | 215 mm |
| Basic dynamic load rating C | 203 kN (203,000 N) |
| Basic static load rating C0 | 190 kN (190,000 N) |
| Ratio C0/C | 0.94 |
| Speed guide, grease lubrication | 3,600 rpm |
| Life exponent p | 3 (ball bearing) |
Values come from the Rotec AI bearing catalogue and are indicative. Confirm against the manufacturer's current catalogue before ordering. Not every dimension (such as width) is listed here.
What the designation 7320 BEP means
| Code | Meaning |
|---|---|
| 73 | Angular contact ball bearing, medium dimension series |
| 20 | bore code "20" = 20 × 5 = 100 mm |
| B | 40° contact angle |
| E | Optimized internal design |
| P | Glass-fibre-reinforced PA66 cage, ball-centred |
Basic rating life of the 7320 BEP
Basic rating life is L10 = (C / P)p million revolutions, where P is the equivalent dynamic load and p = 3 (ball bearing). For a 7320 BEP with C = 203 kN, the table shows what that gives at different load levels. It is the ISO 281 basic life only: it does not include lubrication, contamination, misalignment or reliability modifiers.
| C / P | P as share of C | L10 (million rev) | L10 at 1,500 rpm | L10 at 3,000 rpm |
|---|---|---|---|---|
| 3 | 33.3% | 27 | 300 | 150 |
| 5 | 20.0% | 125 | 1,400 | 690 |
| 8 | 12.5% | 512 | 5,700 | 2,800 |
| 12 | 8.3% | 1,728 | 19,200 | 9,600 |
For example, a C / P of 5 means the equivalent load is 40.6 kN on this bearing. Use the Load Calculator to work out P for your actual radial and axial loads.
Equivalents of the 7320 BEP
Brand-by-brand equivalents for this exact designation are not shown here. The Cross-Reference tool accepts SKF, FAG, NSK, NTN, Timken, Koyo and NRB designations, and shows what is catalogued.
Where the 7320 BEP is used
Angular-contact ball bearings are chosen for: Combined radial and axial load; precision/high-speed arrangements. Typical equipment: Pumps, compressors, spindles, generators, aerospace accessories. Often paired/preloaded; contact angle and lubrication matter.
Other sizes in the same series
The 7320 BEP belongs to the “73 medium” series. The next size down, the 7319 BEP, has a bore of 95 mm and a dynamic rating of 168 kN.
Common problems on bearings like the 7320 BEP
Most field failures trace back to lubrication, contamination, fits and alignment rather than the bearing itself. These guides explain how to recognise and prevent them:
Questions about the 7320 BEP
What are the dimensions of a 7320 BEP bearing?
The 7320 BEP has a bore of 100 mm and an outside diameter of 215 mm. It is a single-row angular contact ball bearing. Series: 73 medium.
What is the load rating of a 7320 BEP bearing?
In the Rotec AI catalogue the 7320 BEP has a basic dynamic load rating C of 203 kN and a basic static load rating C0 of 190 kN. Always confirm against the manufacturer's current catalogue.
What is the equivalent of a 7320 BEP bearing?
Use the Cross-Reference tool in Rotec AI to check brand equivalents for the 7320 BEP.