7232 BCBM bearing
160 × 290 mm · dynamic rating 255 kN · static rating 300 kN. Dimensions, load ratings, designation meaning, life estimates and equivalent parts.
7232 BCBM specification
| Designation | 7232 BCBM |
| Type | Single-row angular contact ball bearing |
| Series | 72 light |
| Bore diameter d | 160 mm |
| Outside diameter D | 290 mm |
| Basic dynamic load rating C | 255 kN (255,000 N) |
| Basic static load rating C0 | 300 kN (300,000 N) |
| Ratio C0/C | 1.18 |
| Speed guide, grease lubrication | 3,000 rpm |
| Life exponent p | 3 (ball bearing) |
Values come from the Rotec AI bearing catalogue and are indicative. Confirm against the manufacturer's current catalogue before ordering. Not every dimension (such as width) is listed here.
What the designation 7232 BCBM means
| Code | Meaning |
|---|---|
| 72 | Angular contact ball bearing, light dimension series |
| 32 | bore code "32" = 32 × 5 = 160 mm |
| B | 40° contact angle |
| CB | Normal axial internal clearance for a matched pair (universal matching) |
Basic rating life of the 7232 BCBM
Basic rating life is L10 = (C / P)p million revolutions, where P is the equivalent dynamic load and p = 3 (ball bearing). For a 7232 BCBM with C = 255 kN, the table shows what that gives at different load levels. It is the ISO 281 basic life only: it does not include lubrication, contamination, misalignment or reliability modifiers.
| C / P | P as share of C | L10 (million rev) | L10 at 1,500 rpm | L10 at 3,000 rpm |
|---|---|---|---|---|
| 3 | 33.3% | 27 | 300 | 150 |
| 5 | 20.0% | 125 | 1,400 | 690 |
| 8 | 12.5% | 512 | 5,700 | 2,800 |
| 12 | 8.3% | 1,728 | 19,200 | 9,600 |
For example, a C / P of 5 means the equivalent load is 51 kN on this bearing. Use the Load Calculator to work out P for your actual radial and axial loads.
Equivalents of the 7232 BCBM
Brand-by-brand equivalents for this exact designation are not shown here. The Cross-Reference tool accepts SKF, FAG, NSK, NTN, Timken, Koyo and NRB designations, and shows what is catalogued.
Where the 7232 BCBM is used
Angular-contact ball bearings are chosen for: Combined radial and axial load; precision/high-speed arrangements. Typical equipment: Pumps, compressors, spindles, generators, aerospace accessories. Often paired/preloaded; contact angle and lubrication matter.
Other sizes in the same series
The 7232 BCBM belongs to the “72 light” series. The next size down, the 7230 BCBM, has a bore of 150 mm and a dynamic rating of 216 kN. The next size up, the 7234 BCBM, has a bore of 170 mm and a rating of 281 kN (+10%).
Common problems on bearings like the 7232 BCBM
Most field failures trace back to lubrication, contamination, fits and alignment rather than the bearing itself. These guides explain how to recognise and prevent them:
Questions about the 7232 BCBM
What are the dimensions of a 7232 BCBM bearing?
The 7232 BCBM has a bore of 160 mm and an outside diameter of 290 mm. It is a single-row angular contact ball bearing. Series: 72 light.
What is the load rating of a 7232 BCBM bearing?
In the Rotec AI catalogue the 7232 BCBM has a basic dynamic load rating C of 255 kN and a basic static load rating C0 of 300 kN. Always confirm against the manufacturer's current catalogue.
What is the equivalent of a 7232 BCBM bearing?
Use the Cross-Reference tool in Rotec AI to check brand equivalents for the 7232 BCBM.