7200 BEP /DB bearing
10 × 30 mm · dynamic rating 11.37 kN · static rating 6.7 kN. Dimensions, load ratings, designation meaning, life estimates and equivalent parts.
7200 BEP /DB specification
| Designation | 7200 BEP /DB |
| Type | Matched pair of angular contact ball bearings (back-to-back) |
| Series | 72 light (pair) |
| Bore diameter d | 10 mm |
| Outside diameter D | 30 mm |
| Basic dynamic load rating C | 11.37 kN (11,372 N) |
| Basic static load rating C0 | 6.7 kN (6,700 N) |
| Ratio C0/C | 0.59 |
| Speed guide, grease lubrication | 27,000 rpm |
| Life exponent p | 3 (ball bearing) |
Values come from the Rotec AI bearing catalogue and are indicative. Confirm against the manufacturer's current catalogue before ordering. Not every dimension (such as width) is listed here.
What the designation 7200 BEP /DB means
| Code | Meaning |
|---|---|
| 72 | Angular contact ball bearing, light dimension series |
| 00 | bore code "00" = 10 mm (one of the four fixed small-bore codes, not the ×5 rule) |
| B | 40° contact angle |
| E | Optimized internal design |
| P | Glass-fibre-reinforced PA66 cage, ball-centred |
| /DB | Two bearings mounted back-to-back as a matched pair — carries combined radial + axial load from both directions with high stiffness |
Basic rating life of the 7200 BEP /DB
Basic rating life is L10 = (C / P)p million revolutions, where P is the equivalent dynamic load and p = 3 (ball bearing). For a 7200 BEP /DB with C = 11.37 kN, the table shows what that gives at different load levels. It is the ISO 281 basic life only: it does not include lubrication, contamination, misalignment or reliability modifiers.
| C / P | P as share of C | L10 (million rev) | L10 at 1,500 rpm | L10 at 3,000 rpm |
|---|---|---|---|---|
| 3 | 33.3% | 27 | 300 | 150 |
| 5 | 20.0% | 125 | 1,400 | 690 |
| 8 | 12.5% | 512 | 5,700 | 2,800 |
| 12 | 8.3% | 1,728 | 19,200 | 9,600 |
For example, a C / P of 5 means the equivalent load is 2.27 kN on this bearing. Use the Load Calculator to work out P for your actual radial and axial loads.
Equivalents of the 7200 BEP /DB
Brand-by-brand equivalents for this exact designation are not shown here. The Cross-Reference tool accepts SKF, FAG, NSK, NTN, Timken, Koyo and NRB designations, and shows what is catalogued.
Where the 7200 BEP /DB is used
Angular-contact ball bearings are chosen for: Combined radial and axial load; precision/high-speed arrangements. Typical equipment: Pumps, compressors, spindles, generators, aerospace accessories. Often paired/preloaded; contact angle and lubrication matter.
Other sizes in the same series
The 7200 BEP /DB belongs to the “72 light (pair)” series. The next size up, the 7201 BEP /DB, has a bore of 12 mm and a rating of 12.33 kN (+8%).
Common problems on bearings like the 7200 BEP /DB
Most field failures trace back to lubrication, contamination, fits and alignment rather than the bearing itself. These guides explain how to recognise and prevent them:
Questions about the 7200 BEP /DB
What are the dimensions of a 7200 BEP /DB bearing?
The 7200 BEP /DB has a bore of 10 mm and an outside diameter of 30 mm. It is a matched pair of angular contact ball bearings (back-to-back). Series: 72 light (pair).
What is the load rating of a 7200 BEP /DB bearing?
In the Rotec AI catalogue the 7200 BEP /DB has a basic dynamic load rating C of 11.37 kN and a basic static load rating C0 of 6.7 kN. Always confirm against the manufacturer's current catalogue.
What is the equivalent of a 7200 BEP /DB bearing?
Use the Cross-Reference tool in Rotec AI to check brand equivalents for the 7200 BEP /DB.