32008 X bearing
40 × 68 mm · dynamic rating 64.7 kN · static rating 71 kN. Dimensions, load ratings, designation meaning, life estimates and equivalent parts.
32008 X specification
| Designation | 32008 X |
| Type | Tapered roller bearing |
| Series | 320 steep-angle |
| Bore diameter d | 40 mm |
| Outside diameter D | 68 mm |
| Basic dynamic load rating C | 64.7 kN (64,700 N) |
| Basic static load rating C0 | 71 kN (71,000 N) |
| Ratio C0/C | 1.10 |
| Speed guide, grease lubrication | 9,500 rpm |
| Life exponent p | 10/3 (roller bearing) |
Values come from the Rotec AI bearing catalogue and are indicative. Confirm against the manufacturer's current catalogue before ordering. Not every dimension (such as width) is listed here.
What the designation 32008 X means
| Code | Meaning |
|---|---|
| 320 | Tapered roller bearing, steep contact angle series (higher axial capacity) |
| 08 | bore code "08" = 8 × 5 = 40 mm |
| X | Boundary dimensions changed to conform to ISO |
Basic rating life of the 32008 X
Basic rating life is L10 = (C / P)p million revolutions, where P is the equivalent dynamic load and p = 10/3 (roller bearing). For a 32008 X with C = 64.7 kN, the table shows what that gives at different load levels. It is the ISO 281 basic life only: it does not include lubrication, contamination, misalignment or reliability modifiers.
| C / P | P as share of C | L10 (million rev) | L10 at 1,500 rpm | L10 at 3,000 rpm |
|---|---|---|---|---|
| 3 | 33.3% | 39 | 430 | 220 |
| 5 | 20.0% | 214 | 2,400 | 1,200 |
| 8 | 12.5% | 1,024 | 11,400 | 5,700 |
| 12 | 8.3% | 3,956 | 44,000 | 22,000 |
For example, a C / P of 5 means the equivalent load is 12.94 kN on this bearing. Use the Load Calculator to work out P for your actual radial and axial loads.
Equivalents of the 32008 X
Brand-by-brand equivalents for this exact designation are not shown here. The Cross-Reference tool accepts SKF, FAG, NSK, NTN, Timken, Koyo and NRB designations, and shows what is catalogued.
Where the 32008 X is used
Tapered roller bearings are chosen for: Combined radial and axial load; stiffness. Typical equipment: Wheel hubs, gearboxes, rail wheelsets, construction/agri equipment. Usually adjusted/preloaded; paired arrangements common.
Other sizes in the same series
The 32008 X belongs to the “320 steep-angle” series. The next size down, the 32007 X, has a bore of 35 mm and a dynamic rating of 52.3 kN. The next size up, the 32009 X, has a bore of 45 mm and a rating of 71.7 kN (+11%).
Common problems on bearings like the 32008 X
Most field failures trace back to lubrication, contamination, fits and alignment rather than the bearing itself. These guides explain how to recognise and prevent them:
Questions about the 32008 X
What are the dimensions of a 32008 X bearing?
The 32008 X has a bore of 40 mm and an outside diameter of 68 mm. It is a tapered roller bearing. Series: 320 steep-angle.
What is the load rating of a 32008 X bearing?
In the Rotec AI catalogue the 32008 X has a basic dynamic load rating C of 64.7 kN and a basic static load rating C0 of 71 kN. Always confirm against the manufacturer's current catalogue.
What is the equivalent of a 32008 X bearing?
Use the Cross-Reference tool in Rotec AI to check brand equivalents for the 32008 X.