22334 CC/W33 bearing
170 × 360 mm · dynamic rating 1863 kN · static rating 2160 kN. Dimensions, load ratings, designation meaning, life estimates and equivalent parts.
22334 CC/W33 specification
| Designation | 22334 CC/W33 |
| Type | Spherical roller bearing |
| Series | 223 medium |
| Bore diameter d | 170 mm |
| Outside diameter D | 360 mm |
| Basic dynamic load rating C | 1863 kN (1,863,000 N) |
| Basic static load rating C0 | 2160 kN (2,160,000 N) |
| Ratio C0/C | 1.16 |
| Speed guide, grease lubrication | 1,800 rpm |
| Life exponent p | 10/3 (roller bearing) |
Values come from the Rotec AI bearing catalogue and are indicative. Confirm against the manufacturer's current catalogue before ordering. Not every dimension (such as width) is listed here.
What the designation 22334 CC/W33 means
| Code | Meaning |
|---|---|
| 223 | Spherical roller bearing, double row self-aligning, medium series (higher capacity) |
| 34 | bore code "34" = 34 × 5 = 170 mm |
Basic rating life of the 22334 CC/W33
Basic rating life is L10 = (C / P)p million revolutions, where P is the equivalent dynamic load and p = 10/3 (roller bearing). For a 22334 CC/W33 with C = 1863 kN, the table shows what that gives at different load levels. It is the ISO 281 basic life only: it does not include lubrication, contamination, misalignment or reliability modifiers.
| C / P | P as share of C | L10 (million rev) | L10 at 1,500 rpm | L10 at 3,000 rpm |
|---|---|---|---|---|
| 3 | 33.3% | 39 | 430 | 220 |
| 5 | 20.0% | 214 | 2,400 | 1,200 |
| 8 | 12.5% | 1,024 | 11,400 | 5,700 |
| 12 | 8.3% | 3,956 | 44,000 | 22,000 |
For example, a C / P of 5 means the equivalent load is 372.6 kN on this bearing. Use the Load Calculator to work out P for your actual radial and axial loads.
Equivalents of the 22334 CC/W33
Brand-by-brand equivalents for this exact designation are not shown here. The Cross-Reference tool accepts SKF, FAG, NSK, NTN, Timken, Koyo and NRB designations, and shows what is catalogued.
Where the 22334 CC/W33 is used
Spherical roller bearings are chosen for: Very high radial load with misalignment capability. Typical equipment: Crushers, mills, conveyors, wind main shafts, paper machines. Robust for shock/dust; lubrication and sealing are crucial.
Other sizes in the same series
The 22334 CC/W33 belongs to the “223 medium” series. The next size down, the 22332 CC/W33, has a bore of 160 mm and a dynamic rating of 1680 kN. The next size up, the 22336 CC/W33, has a bore of 180 mm and a rating of 2077 kN (+11%).
Common problems on bearings like the 22334 CC/W33
Most field failures trace back to lubrication, contamination, fits and alignment rather than the bearing itself. These guides explain how to recognise and prevent them:
Questions about the 22334 CC/W33
What are the dimensions of a 22334 CC/W33 bearing?
The 22334 CC/W33 has a bore of 170 mm and an outside diameter of 360 mm. It is a spherical roller bearing. Series: 223 medium.
What is the load rating of a 22334 CC/W33 bearing?
In the Rotec AI catalogue the 22334 CC/W33 has a basic dynamic load rating C of 1863 kN and a basic static load rating C0 of 2160 kN. Always confirm against the manufacturer's current catalogue.
What is the equivalent of a 22334 CC/W33 bearing?
Use the Cross-Reference tool in Rotec AI to check brand equivalents for the 22334 CC/W33.